How High Do Car Lifts Go?

Car Lifts Go

Whether you’re in the market for a new car lift or a new home garage, you’ll need to know the measurements of your new piece of equipment. Before you purchase any new piece of equipment, make sure to consider your budget, needs, and priorities.

The most basic way to measure the height of your new 10000 lb 2 post car lift is by taking the height of your ceiling and subtracting that from the height of the deck. For example, if your ceiling is 12 feet tall, then you’ll need to leave at least ten inches of space around the lift for clearance. The corresponding height for a free-standing car lift may be a bit higher since you’ll need to lift your car up to the platform.

You’ll also need to take into consideration the height of your floor, ceiling, and beams. A good rule of thumb is to have at least five feet of clearance around the lift, which will give you plenty of room to maneuver. It may be a good idea to have a few buddies help you assemble the lift since pieces are heavy. A car lift is also a lot easier to assemble than a jack and a hammer.

How High Do Car Lifts Go?

The most expensive car lifts can cost well over a grand. However, you can still find inexpensive lifts that will do the job in style. The most efficient lifts are the mobile column varieties, which allow for frequent heavy lifting. They are also the best fit for commercial garages, which typically have more room for such equipment.

While it’s true that a car lift doesn’t come cheap, you’ll be able to get more for your money if you know what to look for. A good example is the BendPak Clearfloor two-post car lift, which features an unobstructed floor space. The lift also offers a few other perks, including increased reliability and versatility. The cheapest BendPak lift can be purchased for as little as $500.

A two-post lift uses hydraulic posts on either side of a flat plane. Each post is tall and can lift one car above and one below it. The two posts are connected by a connecting bracket that runs across the posts. It’s also possible to lift two cars off of one lift, though it’s much more common to use two separate lifts. The most important part of a two-post lift is to ensure that the pads on the lift are equal. They should be 12 inches wide on each side from the base plates.

The best car lifts come with features such as automatic safety chains and anti-sway devices. The lift may also have an auto-lock function, which prevents the vehicle from moving on the lift if there’s an emergency. Another good feature is the parking area. It’s a good idea to have a spot for a car lift, since it’s a convenient way to store a car while it’s being worked on. A two-post lift is the best choice for most vehicle tasks, though.

Leave a Reply

Your email address will not be published. Required fields are marked *